Over-molded Plastic Filters and Screens

A wide range of filter elements and filtration degrees are available for Amiad's plastic filters.
Screen Elements The screen elements are constructed of molded plastic ribs that support a stainless steel weave-wire screen or monofil polyester weave screen with filtration degrees from 22 to 800 micron.
For pre-filtration (also called straining) between 800 and 3500 micron, Amiad offers perforated stainless steel screens.
Suspended solids accumulate on the inside surface of the screen. The screen can be easily removed from the housing to be rinsed manually.
Water flows through the filter element from the inside out, so that suspended solids primarily accumulate on the lower end of the element and can be removed by means of a flush valve. The screen elements are especially suitable for separating inorganic particles and creating very low head loss.
The different filtration degrees are color-coded. The cylinder incorporates two O-rings to ensure perfect sealing inside the filter housing.